Poly(Butylene Adipate-co-Terephthalate

Storage： Temperatures during transportation and storage should not exceed 70 ºC. Keep resin in dry and ventilated warehouse to prevent moisture. Avoid contacting with soil, water and sludge, and no exposure to direct sunlight and extreme temperature. The maximum s helf life is 2 years in...

Storage：

Temperatures during transportation and storage should not exceed 70 ºC. Keep

resin in dry and ventilated warehouse to prevent moisture. Avoid contacting with soil,

water and sludge, and no exposure to direct sunlight and extreme temperature. The

maximum s helf life is 2 years in ambient temperature of 23ºC if the package has been

tightly sealed.

Drying：

It is recommended to pre-dry the material prior to getting the best processing

performance. If the moisture of the resin is less than 0.05% pre-drying may not be

needed. Typical drying conditions：2 hours at 70ºC (158ºF).

Processing Guide：

ECO-0101 is not suitable for direct film blowing, it is suggested to add slip

additive like SiO2 or CaCO3, it can also be blended with starch, PLA, PHA, cellulous

etc.. Normally the extrusion temperature is 140ºC -160ºC, it is important to make sure

the blowing machine starts from the lowest temperature. If the blowing performance is

not optimized it is recommended to increase the temperature by 5ºC.

Hot Tags: poly(butylene adipate-co-terephthalate, China poly(butylene adipate-co-terephthalate manufacturers, suppliers, factory, pp spunbond fabric, plastic manufacturing raw materials, emulsion pvc resin, raw material of non woven fabric, titanium dioxide in food, woven nonwoven and knitted fabrics